Fan Heater Usage Guidance

★  Please read this guidance carefully before using your fan heater, so that you can use it correctly. 

★  Please keep well with this guide book.

Brief Introduction of the product

The fan heater of these series adopts heating technology of resistance wire, it has a high heating efficiency, centralized heat and extensive usage. 

Name of the Components:

Technical parameters:

Usage:

1.Please check before you use:

A: The heating wire and electric wire can not be broken.

B: Please do not use the socket lower than 10A for fear of any accident.

2.If you want to use the fan heater , you must put the plug-in first, then press the one switch, the power is 1000W, at the same time the indicator is red, the fan heater is start working. Then add the another power switch the full power is 2000W. 

3.If you stop using fan heater, turn the power switch to the original position, then put off the plug.

5.If you want to move the fan heater , please turn off the power switch, then put off the plug, and hand on the handle on the back of the fan heater.

Electricity Circuit:

Notes:

When using any electrical appliance basic precautions should be followed . Please read the following instructions as they are for your benefit and safety:

1. Strictly prohibit to use the heater near the combustibles such as curtains etc., explosive objects, things easy to be deformed or deteriorate, and where full of dust.

2. Strictly prohibit to use the heater in where be easy shocked or be toppled.

3. Strictly prohibit to stem the small hole on the heater and insert anything into the machine. Especially for children or infirm persons without supervision.

4. Do not use this fan heater in the immediate surroundings of a bath, a shower or a swimming pool.

5. Strictly prohibit to use the radiator when it being covered.

6. Strictly prohibit to plug-in or off the plug instead of turn on or off the power switch.

7. Strictly prohibit to use the same socket-outlet with other big power appliance.

8. Please put off the plug when nobody is nearby.

9. There is slight sound when turned on or off, which is normal due to the material expanding when heated and contract when cooled, please do not be worried.

10. If there is something wrong with the heater, please turn off the machine and put off the plug immediately and send to service agent.

11. The used heating wire treated by a special way, it has a long using life, please do not use any other heating wire instead of it.

12. The fan heater must not be located immediately below a socket-outlet

13. In order to avoid overheating, do not cover the heater.

14. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similar qualified person in order to avoid a hazard

You can download the doc file by click the latter words:   Fan Heaters N75 User Manual.doc